SANS 10400-O Natural Lighting, Ventilation & Glazing Calculator

Evaluate multi-room floor areas against statutory 10% natural daylighting and max(0.20 m², 5%) natural ventilation thresholds, detect SANS 10400-N safety glass triggers, and export clean CAD window schedule notes.

Total Floor Screened
Glazed / Openable Area
Part O Screening Status
SANS 10400-N Safety Glass
Sill < 800 mm or door/wet zone

SANS 10400-XA:2021 (Edition 2) vs. Part O Demarcation

Your screened total fenestration ratio is of net screened floor area. Keep two distinct SANS parts separate on your submission:

  • SANS 10400-O establishes minimums: habitable residential rooms need at least 10% clear glazing and max(0.20 m², 5%) openable area.
  • SANS 10400-XA:2021 (Edition 2) governs energy maximums: unlike Edition 1 (2011), keeping total glazing under 15% does not automatically satisfy Edition 2. You must verify facade orientation (North, East, South, West), overhang shading projections, South African Climatic Energy Zone (Zones 1–7), and glazing U-value / SHGC limits.

CAD / Revit Window Schedule Note


        

Screen the Rest of Your Drawing Set Before Council Submission

Part O window schedules are only one item on an examiner's checklist. Upload your full architectural PDF on Plan Comply to screen Parts A–XA, SACAP declarations, boundary setbacks, drainage gradients, and local municipal triggers in one run. Includes 1 Free Audit Credit on signup.

Statutory Screening Disclaimer & SABS Copyright Attribution

Plan Comply provides automated pre-submission screening and does not guarantee municipal council approval. Statutory authority under the National Building Regulations and Building Standards Act (Act 103 of 1977) remains solely with the appointed Building Control Officer (BCO). Borrowed light paths, mechanical ventilation airflow rates (e.g. L/s per occupant or air changes/hour), and SANS 10400-XA:2021 rational designs must be signed off by the responsible registered professional.

SANS 10400 standards are copyrighted publications of the South African Bureau of Standards (SABS) under the Standards Act 8 of 2008. Official copies must be obtained from store.sabs.co.za. Calculations are published as factual parameter verification under Section 12 of the Copyright Act 98 of 1978.